Advanced Search|Search Tips
MOTOR, 1/2HP,90VDC,WASH DOWN, 56CFACE Motor for Conveyors.
Used on APACKS Turntables. APACKS Part# PTE-MT-TT-1 MOTOR, 1/8HP 90VDC 14 RPM 341INLBS USE the E-PAK Part #
Motor, 1/2HP, 1750RPM, 90VDC This motor is used on APACKS Conveyors & Cappers Use the E-PAK Part Number...
Supply Pump Motor Starter Enclosure. It can be made for 115VAC, 230VAC 1 Phase, 230VAC 3 Phase, 480VAC 3 Phase. Independent motor controls to keep the motor separate from the main control panel.
Power Cable for Cooling Fan motor 1207-165: (Q.D. Connector at 45deg, 2 meters long, with flying leads, Good for 24 to 240Vac, or Vdc motors on this family of Cooling fans)...
Round Nickel Plated Steel Guard used to protect fan from wires, & Fingers on the inside of enclosure. (Used with 1207-165):
Square Plastic Guard, & Filter for Cooling Fan 1207-165. (Use this part for Gurading exhaust, and air into enclosure, NEMA-12 use only)...
Enclosure, Cooling Fan, 4.72"x4.72" Square, 24Vdc motor, 105cfm, (Can be used in any enclosure larger then 6" deep. NEMA-12 ONLY).
INHIBIT CONNECTOR FOR RELIANCE DRIVE
MOTOR DRIVE, AUX 7" HEAT SINK Used for KBIC Drive Boards
MOTOR DRIVE, 5K SPEED POT. KIT (KB)
KNOB AND DIAL KIT (KBIC)
AC Drive, 1 HP, AC Inverter Drive: 208 / 230Vac, 1ph, 1 hp Drive, Open Frame, with digital display
AC Drive, 1 HP, AC Inverter Drive: 208 / 230Vac, 3ph, 1 hp Drive, Open Frame, with digital display
AC Drive, 1/2HP, AC Inverter Drive: 208 / 230Vac, 3ph, 1/2hp Drive, Open Frame, with digital display
Stand alone AC Drive, 1/2HP, Mostly used on 230VAC conveyor and turn tables. Lenze Drive: Plastic Nema-4, 4x Housing, 230Vac, 3ph, 50/60hz1/2hp AC Inverter, Stand AloneOutput = 1/2hp, 230Vac, 3ph,...